Were you sent here from the Lighting Systems Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Lighting Systems

1. Disconnect the fog lamp switch connector.
2. Connect a test light between the switch connector terminal 7 and ground.
3. Turn the headlamp switch to the PARK position.
4. Turn the instrument panel dimmer switch to the brightest position.

Does the test light illuminate?

--

Go to Step 3

Go to Step 4

Connect the test light between the switch connector terminals 7 and 8.

Does the test light illuminate?

--

Go to Step 7

Go to Step 5

Repair the open or high resistance in the parking lamp feed circuit 9.

Is the repair complete?

--

Go to Step 8

--

1. Disconnect the instrument panel connector.
2. Test and repair the fog lamp switch illumination control circuit 717 for an open or high resistance.

Did you find and correct the condition?

--

Go to Step 8

Go to Step 6

Replace the instrument cluster. Refer to Instrument Cluster Replacement .

Is the repair complete?

--

Go to Step 8

--

Replace the fog lamp switch illumination bulb.

Is the repair complete?

--

Go to Step 8

--

1. Clear any DTCs which may have set. Refer to Diagnostic Trouble Code (DTC) Clearing .
2. Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Diagnostic System Check - Lighting Systems