Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: Brake warning indicator remains illuminated at all times with the ignition switch turned ON, parking brake released, and brake fluid level is normal. | ||||
1 | Did you review the Brake Warning System Operation and perform the necessary inspections? | -- | Go to Symptoms | |
2 |
Does the scan tool indicate the brake lamp input OFF? | -- | ||
3 | Does the scan tool indicate the brake fluid level OK? | -- | ||
4 | Does the scan tool indicate the park brake switch inactive? | -- | ||
5 | Disconnect the brake fluid level switch connector. Does the scan tool indicate the brake fluid level OK? | -- | ||
6 | Replace the brake fluid level switch. Refer to Brake Fluid Level Indicator Switch Replacement . Is the repair complete? | -- | -- | |
7 | Inspect and repair the short to ground in circuit 333, if ok replace the IPC. Refer to Instrument Cluster Replacement . Is the repair complete? | -- | -- | |
8 | Disconnect the parking brake switch connector. Does the scan tool indicate the parking brake switch inactive? | -- | ||
9 | Replace the parking brake lever assembly. Refer to Park Brake Lever Assembly Replacement . Is the repair complete? | -- | -- | |
10 | Inspect and repair the short to ground in circuit 33, if ok replace the IPC. Refer to Instrument Cluster Replacement . Is the repair complete? | -- | -- | |
11 | Replace the IPC. Refer to Instrument Cluster Replacement . Is the repair complete? | -- | -- | |
12 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Symptoms |
