Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Were you sent here from the IPC Diagnostic System Check? | -- | ||
2 |
Does the scan tool communicate with the PCM? | -- | ||
3 | Select PCM display DTC function on the scan tool. Does the scan tool display DTC P0522 or P0523? | -- | ||
4 | With a scan tool, select IPC special functions and command a sweep test (minimum to maximum) on the oil pressure gauge. Does the scan tool control the oil pressure gauge? | -- | ||
5 | With a scan tool, observe the Oil Pressure parameter in the IPC data list. Does the scan tool indicate the correct Oil Pressure? | -- | ||
6 | With a scan tool, observe the Oil Pressure parameter in the IPC data list and the oil pressure gauge display on the IPC. Does the scan tool display correspond with the oil pressure gauge display within the specified value? | 15°C (15°F) | System OK | |
7 | With a scan tool, observe Engine Oil Pressure parameter in the PCM data list. Does the scan tool indicate the correct Engine Oil Pressure? | -- | ||
8 | Replace the IPC assembly. Refer to Instrument Cluster Replacement . Did you complete the replacement? | -- | -- | |
9 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
