Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the IPC Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Does the scan tool display DTC B1532? | -- | Go to Diagnostic Trouble Code (DTC) List - Instrument Cluster/Driver Information System | |
3 | Press and release the E/M button on the RH DIC switch to toggle between English and Metric display. Does the km/h and MPH indicator turn ON and OFF? | -- | System OK | |
4 | With a scan tool, select IPC special functions and command the km/h and MPH indicator ON and OFF. Does the km/h and MPH indicator turn ON and OFF with each command? | -- | ||
5 | Test the signal and ground circuit of the RH DIC switch 5 (E/M 5) for an open. Refer to Circuit Testing and Wiring Repairs Did you find and correct the condition? | -- | Go to Step 6 | |
6 | Inspect for poor connections at the harness connector of the IPC. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs Did you find and correct the condition? | -- | ||
7 | Inspect for poor connections at the harness connector of the RH DIC switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs Did you find and correct the condition? | -- | ||
8 | Replace the RH DIC switch assembly. Refer to Driver Information Display Switch Replacement . Is the replacement complete? | -- | -- | |
9 | Inspect the km/h and mph bulb for and open. Refer to Instrument Cluster Indicator Lamp Replacement . Did you find and correct the condition? | -- | ||
10 | Replace the IPC. Refer to Instrument Cluster Replacement . Did you complete the replacement? | -- | -- | |
11 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
