Step | Action | Value(s) | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
DEFINITION: RAP functions of the Radio only, or Radio and Doors is not operating properly. | ||||||||||
1 | Has the RAP Diagnostic System Check been performed? | -- | ||||||||
2 |
Does the scan tool indicate the switch status open and closed? | -- | ||||||||
3 |
Does the scan tool indicate the switch status open and closed? | -- | ||||||||
4 | Observe the Ignition 1, Ignition 2, and Ignition 3 input status. The status of each input display should be ON during the following conditions:
Does the scan tool display Ignition 1, 2, and 3 ON during the conditions listed, and OFF during any other condition? | -- | ||||||||
5 |
Do both input displays indicate Active and Inactive in correct relation to the actual condition? | -- | ||||||||
6 |
Is the resistance infinite with the door closed and near 0 ohms with the door open? | -- | ||||||||
7 |
Is the resistance infinite with the door closed and near 0 ohms with the door open? | -- | ||||||||
8 | Test and repair circuits 745 and 150 from the Driver Door Latch Assembly for the following conditions:
Did you find and correct the condition? | -- | ||||||||
9 | Test and repair circuits 746 and 150 from the Passenger Door Latch Assembly for the following conditions:
Did you find and correct the condition? | -- | ||||||||
10 | Replace the Driver Door Latch Assembly. Refer to Door Lock Replacement . Did you complete the repair? | -- | -- | |||||||
11 | Replace the Passenger Door Latch Assembly. Refer to Door Lock Replacement . Did you complete the repair? | -- | -- | |||||||
12 | Test and repair the following BCM ignition feed circuits as necessary:
Did you find and correct the condition? | -- | ||||||||
13 |
Is the resistance to ground infinite with the key in the ignition switch and near 0 ohms when removed? | -- | ||||||||
14 |
Is the resistance to ground near 0 ohms with the key in the ignition switch and infinite when removed? | -- | ||||||||
15 | Test and repair as necessary the following circuits:
Did you find and correct the condition? | -- | ||||||||
16 | Replace the Ignition Switch. Refer to Ignition and Start Switch Replacement . Did you complete the repair? | -- | -- | |||||||
17 | Replace the BCM. Refer to Body Control Module Replacement and Body Control Module (BCM) Programming/RPO Configuration . Did you complete the repair? | -- | -- | |||||||
18 |
Did you correct the condition? | -- | System OK | |||||||
