GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Corvette 🢒 Body and Accessories 🢒 Bumpers 🢒 Lamp Deflector Replacement - Front Bumper Fascia

Removal Procedure

    Object Number: 63701 Size: SH
  1. Remove the fascia close out panel. Refer to Front Bumper Fascia Lower Close Out Panel Replacement .
  2. Remove the fog lamp, if equipped.

    3. Object Number: 63724 Size: SH
  3. Remove the bolts attaching the deflector.
  4. Remove the deflector.

Installation Procedure

Important: 

   • If the vehicle has the fog lamp option ensure that the fog lamp opening filler has been removed from the fascia deflector.
   • If the vehicle does not have the fog lamp option ensure that the fog lamp opening filler has been installed to the fascia deflector.


    Object Number: 63724 Size: SH
  1. Position the deflector to the fascia.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts attaching the deflector to the fascia.

    3. Tighten
    Tighten the fascia lamp deflector bolts to 2.5 N·m (22 lb in).

  3. Install the fog lamp, if removed. Refer to Front Fog Lamp Replacement in Lighting Systems.

    4. Object Number: 63701 Size: SH
  4. Install the front fascia close out panel. Refer to Front Bumper Fascia Lower Close Out Panel Replacement .