GM Service Manual Online
For 1990-2009 cars only

Weatherstrip Retainer Replacement Hardtop Upper Lock Pillar

Removal Procedure


    Object Number: 376671  Size: SH
  1. Remove the push-in retainer securing the lower end of the weatherstrip to the lock pillar.
  2. Remove the door opening weatherstrip from the lock pillar retainer
  3. Remove the door opening weatherstrip from the roof retainer from the lock pillar to the windshield.

  4. Object Number: 376675  Size: SH
  5. Remove the screws securing the lock pillar retainer.
  6. Remove the lock pillar retainer.

Installation Procedure


    Object Number: 376675  Size: SH
  1. Install the lock pillar retainer.
  2. Tighten
    Tighten the lock pillar weatherstrip retainer screws to 3.4 N·m (30 lb in).

  3. Apply a 6 mm (0.25 in) x 100 mm (4 in) bead of sealer across the lower edge of the retainer and onto the lock pillar.
  4. Install the weatherstrip. Refer to Weatherstrip Replacement in Stationary Windows.