GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Corvette 🢒 Body and Accessories 🢒 Wipers/Washer Systems 🢒 Windshield Wiper and Washer Switch Replacement

Removal Procedure

    Object Number: 73209 Size: SH
  1. Remove the tilt wheel lever (4). Refer to Tilt Lever Replacement - On Vehicle in Steering Wheel and Column-Tilt.
  2. Remove the driver knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement in Instrument Panel, Gages and Console.
  3. Separate and remove the upper (1) and lower (3) steering column covers.

    4. Object Number: 70097 Size: SH
  4. Disconnect the electrical connector from the wiring harness.
  5. Release the upper and lower retaining clips and slide the wiper/washer switch from the steering column lock module.

Installation Procedure

    Object Number: 70097 Size: SH
  1. Slide the wiper/washer switch into the steering column lock module until the upper and lower retaining clips snap into place.
  2. Connect the electrical connector into the wiring harness.

    3. Object Number: 73209 Size: SH
  3. Install the upper (1) and lower (3) steering column covers.
  4. Install the tilt wheel lever (4). Refer to Tilt Lever Replacement - On Vehicle in Steering Wheel and Column-Tilt.
  5. Install the driver knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement in Instrument Panel, Gages and Console.