For 1990-2009 cars only
Removal Procedure
- Insert a small coin between the 2 halves of the transmitter case in the slot located near the key ring.
- Twist the coin in order to open the case.
- Remove the cover while being careful not to damage the seal.
- Remove the battery from the transmitter.
Installation Procedure
- Install the new battery (CR 2450 or equivalent) (2) with the positive (+) side facing up.
- Inspect that the seal is properly positioned.
- Snap the 2 halves together (1, 3).
- Synchronize the transmitter to the receiver. Refer to Transmitter Synchronization .
