Checks
| Action
|
Definition:
The engine cranks OK, but does not start for a long time. The engine does
eventually run, or may start but immediately dies.
|
Preliminary Checks
|
| • | Make sure the driver is using the correct starting procedure. |
|
Sensor Checks
| Check the Engine Coolant
Temperature (ECT) sensor. Use the Scan Tool in order to compare the engine
coolant temperature with the ambient air temperature on a cold engine. If
the coolant temperature reading is more than 5° greater or less than the
ambient air temperature on a cold engine, check for a high resistance in the
coolant sensor circuit or the sensor itself.
|
Fuel System Checks
|
| • | Check the engine shut-off solenoid operation. Refer to Control
Module Systems. |
| • | Check the fuel tank cap vent. |
|
Electrical
System Checks
|
| • | Check for a slow cranking speed. |
|
Air Intake
System Checks
|
| • | Check the air cleaner and the air intake ducts for a restriction. |
| • | Check for a restriction in the turbo charger inlet duct. |
| • | Check for a restriction in the intake manifold. |
|
Exhaust
System Check
| Check the
exhaust system for a possible restriction. Refer to Exhaust Systems.
|
Engine Mechanical
Checks
| Check the engine
for the following:
| • | Broken or weak valve springs |
|
Additional
Checks
|
| • | Check for a no crank signal. Refer to Control Module Systems. |
| • | Check the Service Bulletins for control module software updates. |
|
