GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 HHR 🢒 Bulletins 🢒 SMU - Revised Instrument Panel Accessory Trim Plate Replacement and Console Replacement

SMU - Revised Instrument Panel Accessory Trim Plate Replacement and Console Replacement

Subject:Revised Instrument Panel Accessory Trim Plate Replacement and Console Replacement

Models:2006 Chevrolet HHR


This bulletin is being issued to revise the Instrument Panel Accessory Trim Plate Replacement procedure and the Console Replacement procedure in the Instrument Panel, Gages and Console sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.

The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.

Instrument Panel Accessory Trim Plate Replacement
Object Number: 1608389 Size: MF

Callout

Component Name

Preliminary Procedure

Remove the front floor console. Refer to Console Replacement - Front Floor.

1

Instrument Panel Accessory Trim Plate Assembly

Tip
Disconnect the electrical connectors.

2

Retainer Clips (Qty: 8)

Console Replacement
Object Number: 1607826 Size: MF

Callout

Component Name

Preliminary Procedure

  1. Remove the front floor console. Refer to Console Replacement - Front Floor.
  2. Remove the rear console trim plate. Refer to Trim Plate Replacement - Console Rear.

1

Rear Floor Console Assembly Nuts (Qty: 4)

Notice: Refer to Fastener Notice in Cautions and Notices.

Tighten
2 N·m (18 lb in)

2

Rear Floor Console Assembly

Tip
Disconnect the electrical connector.