The automatic day-night mirror system consists of an inside rearview mirror.

With the ignition switch in the ON position, ignition 3 voltage is supplied through the A/C CRUISE fuse to the inside rearview mirror. The inside rearview mirror uses 2 photocell sensors in order to determine light conditions in the front and the back of the vehicle. At night, with the automatic day-night feature enabled, the mirror automatically darkens to reduce the glare from the headlamps from behind. In the daytime, the mirror is in a normal state. With the gear selector lever in the REVERSE position, backup lamp supply voltage is supplied as an input to the inside rearview mirror. The inside rearview mirror will gradually change to a normal state as a result of the backup lamp supply voltage input. Ground for the inside rearview mirror is provided by G302.

The inside rearview mirror has a switch located at the center of the mirror to enable or disable the automatic day-night feature. With the ignition in the ON position, depress the switch to enable the automatic day-night feature of the mirror. A green indicator will illuminate on the mirror when the automatic day-night feature is enabled. To disable the automatic day-night feature of the mirror, depress the switch.

This is the on/off switch for the automatic day-night mirror. The on/off switch is used to enable or disable the automatic day-night feature of the mirror. With the ignition in the ON position, depress and hold the on/off switch for 4 seconds to enable the automatic day-night feature of the mirror. A green indicator will illuminate on the mirror when the automatic day-night feature is enabled. To disable the automatic day-night feature of the mirror, depress and hold the on/off switch for 4 seconds.