A power sunroof (RPO CF5 option) is available with the
following features:
| • | A power sliding window panel |
| • | A manually operated sunshade |
The power sunroof is electrically operated from a 2 position
rocker type switch. The rocker type switch is located in the center of the
windshield header area.
Vent Position
In order to move the sunroof to the vent position, perform the following
steps:
- Turn the ignition switch to the run
position.
- Press and release the control switch to
the rearward position.
Open Position
When the switch rearward position is pressed a a second time and released
using the window in the vent position, the window will slide back above the
roof panel to the fully open position.
Closed Position
In order to close the sunroof, hold the control switch in the forward
position until the following functions occur:
| • | The window completely closes. |
| • | The wind deflector retracts. |
| • | The wind deflector seals against the roof opening flange. |
An express module at the front of the module causes the window panel
to stop in the following positions:
The Electrical Harness
An electrical harness is routed along the following areas:
| • | Along the left portion of the windshield
header |
| • | Down the left windshield pillar |
For sunroof electrical diagnosis, refer to Power Sunroof in Electrical
Diagnosis.
