GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Lumina 🢒 Body and Accessories 🢒 Exterior Trim 🢒 Front Bumper Fascia Emblem Replacement

Removal Procedure
  1. Open the hood.
  2. Remove the top center fascia retainers.

    3. Object Number: 293463 Size: MH
  3. Lift the fascia and remove the grille emblem nuts (1) from the front bumper fascia emblem (3) at the under edge of the front bumper fascia.
  4. Remove the front bumper fascia emblem from the front bumper fascia.

Installation Procedure
  1. Install the front bumper fascia emblem (3) to the front bumper fascia.

    2. Object Number: 293463 Size: MH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Lift the front fascia and Install the emblem nuts (1).

    3. Tighten
    Tighten the grille emblem nuts to 2 N·m (18 lb in).

  3. Install the top center fascia retainers.
  4. Close the hood.