Rear Bumper Fascia Molding Replacement. Chevrolet Malibu 1998

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 1998 🢒 Malibu 🢒 Body and Accessories 🢒 Bumpers 🢒 Rear Bumper Fascia Molding Replacement

Remove the molding (2) from the fascia (1). Pry off with a flat bladed tool. The molding (2) is retained by two-sided tape.
Clean the fascia using a mild soap and water solution.

Install the molding (2) onto the fascia (1). Ensure the unit is retained.