Removal Procedure
- Remove the side trim panel.
- Remove the screw (2)
from the hood latch release cable.
- Remove the handle on the hood latch release cable from the hinge
pillar.
- Disconnect the ball on the hood latch release cable from the hood
latch.
- Disconnect the hood latch release cable from the engine cowl by
pushing the hood latch cable grommet from the engine compartment into the
passenger compartment.
- Remove the hood latch
release cable (1).
Installation Procedure
- Install the hood latch
release cable (1) through the hole in the dash panel.
- Apply the sealer to the grommet. Pull the grommet from the engine
compartment until the grommet is seated in the dash panel hole.
- Install the ball on the hood latch release cable to the hood release
handle.
- Install the handle on the hood latch release cable to the hinge
pillar.
- Install the screw (2)
to the hood latch release cable.
- Install the side trim panel retainers.