Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Disconnect the left IP junction block connector C3.
- Connect a fused jumper between terminal A4 of the left
IP junction block connector C3 and B+.
- Connect a fused jumper between terminal A2 of the left
IP junction block connector C3 and ground.
Does the motor operate?
| --
| Go to
Step 9
| Go to
Step 2
|
2
|
- Reconnect the left IP junction block connector C3.
- Disconnect the left front door lock motor connector.
- Connect a test lamp between terminal A of the left front
door lock motor connector and ground.
- Press and hold the left front door lock switch in the UNLOCK position.
Does the test lamp light?
| --
| Go to
Step 3
| Go to
Step 4
|
3
|
- Connect a test lamp between terminal A and terminal B
of the left front door lock motor connector.
- Press and hold the left front door lock switch in the UNLOCK position.
Does the test lamp light?
| --
| Go to
Step 6
| Go to
Step 7
|
4
|
- Connect a test lamp between terminal A4 of the left IP
junction block connector C3 and ground.
- Press and hold the left front door lock switch in the UNLOCK position.
Does the test lamp light?
| --
| Go to
Step 5
| Go to
Step 9
|
5
| Repair the open in
CKT 294 between the left IP junction block and the left front door
lock motor. Refer to
Wiring Repairs
in Wiring Systems.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
6
| Replace the left front door lock motor. Refer to
Door Control Module Replacement
.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
7
|
- Backprobe the left IP junction block, using a test lamp between
terminal A2 of connector C3 and B+.
- Press and hold the left front door lock switch in the UNLOCK position.
Does the test lamp light?
| --
| Go to
Step 8
| Go to
Step 9
|
8
| Repair the open in
CKT 295 between the left front door lock motor and the left IP junction
block. Refer to Wiring Repair in Wiring Systems.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
9
| Replace the left IP junction block. Refer to
Relay/Fuse Center Replacement
in Wiring Systems.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
