Tools Required

J 9886-01 Door Handle Clip Remover

1. Remove the spring clip by inserting the J 9886-01 between the window regulator handle and the regulator handle bearing plate.
2. Pull the door window regulator handle (2) outward in order to remove the handle.
3. Remove the regulator handle bearing plate (1).

1. Raise the window to the up position.



2. Install the clip to the door window regulator handle (2).
3. Install the regulator handle bearing plate (1).
4. Position the door window regulator handle.
5. Push the door window regulator handle inward in order to secure the handle.