Grille Replacement Chevrolet

1. Open the hood.



2. Remove the push-in retainers (1) from the upper edge of the grille.
3. Disconnect the grille (3) from the fascia (2).

1. Connect the grille (3) to the fascia (2).
2. Install the push-in retainers (1) along the upper edge of the grille.
3. Close the hood.

Grille Replacement Oldsmobile

1. Remove the screw (2) from the grille (3).
2. Disconnect the grille (3) from the fascia.

1. Connect the grille (3) to the fascia.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the grille retaining screw (2).

Tighten
Tighten the screw 2 N·m (20 lb in).