EXCH. PROGRAM - PARTS MGMT PROG. FOR BFC & I/P CLUSTER. Chevrolet Malibu 1998

REVISION: 01/13/98

THIS BULLETIN IS BEING REVISED TO TERMINATE THE EXCHANGE PROGRAM. PLEASE DISCARD CORPORATE BULLETIN NUMBER 73-82-11 (SECTION 8 - CHASSIS/BODY ELECTRICAL). ______________________________________________________________________

SUBJECT: EXCHANGE PROGRAM - TERMINATION OF PARTS MANAGEMENT PROGRAM FOR BFC AND I/P CLUSTER

MODELS: 1998 CHEVROLET MALIBU 1998 OLDSMOBILE CUTLASS

********************************************************************** IMPORTANT:

GM OF CANADA DEALERS AND NAES DEALERS ARE NOT AUTHORIZED TO UTILIZE THIS SERVICE BULLETIN. *********************************************************************

THE EXCHANGE PROGRAM WAS USED TO GAIN FEEDBACK ON THE NEW ELECTRONIC SERIAL DATA SYSTEM ON THE ABOVE LISTED VEHICLES.

THE PROGRAM WILL END ON DECEMBER 23, 1997 AND THE FOLLOWING PART NUMBERS WILL BECOME UNRESTRICTED. THANK YOU FOR YOUR HELP.

DESCRIPTION P/N =========== ===

BFC (BODY FUNCTION CONTROLLER) 16255213

IPC (INSTRUMENT PANEL CLUSTER) CHEVROLET MALIBU 16249141/16263451 OLDSMOBILE CUTLASS 16249143/16264973

PARTS INFORMATION:

PARTS ARE CURRENTLY AVAILABLE FROM GMSPO.

FIGURES: 00 ATTACHMENTS: 00

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.