Step | Action | Yes | No |
|---|---|---|---|
1 | Was the lighting systems diagnostic system check performed? | Go to Step 2 | |
2 |
Does the test lamp illuminate? | Go to Step 3 | Go to Step 6 |
3 | Use a testlamp connected to battery positive voltage in order to test for ground at terminal B of the mirror lamps/switch connector. Does the testlamp illuminate? | Go to Step 4 | Go to Step 7 |
4 | Inspect for poor connections at the mirror lamps/switch connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Was a condition found and corrected? | System OK | Go to Step 5 |
5 | Replace the rearview mirror/reading lamps assembly. Refer to Inside Rearview Mirror Replacement in Stationary Windows. Did you complete the repair? | System OK | -- |
6 | Repair the open in CKT 1732 between the mirror lamps/switch connector and the left IP junction block. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | System OK | -- |
7 | Repair the open in the ground circuit 750. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | System OK | -- |
