Was A Diagnostic System Check performed?

--

Go to Step 2

Go to Diagnostic System Check - Lighting Systems

1. Turn the ignition switch to the ON position.
2. Turn the turn/hazard - headlamp switch assembly to the HEAD position.
3. Disconnect the license lamp connector.
4. Connect a test lamp between the park lamp feed circuit of the license lamp harness connector and ground.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

Connect a test lamp between the park lamp feed circuit and the ground circuit of the license lamp harness connector.

Does the test lamp light?

--

Go to Step 5

Go to Step 6

Repair open in the parking lamp feed circuit. Refer to Wiring Repairs

Is repair complete?

--

System OK

--

Replace the license bulb.

Is the repair complete?

--

System OK

--

Repair the open in the ground circuit. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

System OK

--