Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was A Diagnostic System Check performed? | -- | Go to Step 2 | |
2 |
Does the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 | Connect the test lamp between terminal A and terminal C of the hazard switch connector. Does the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
4 | Use the test lamp in order to backprobe the left IP junction block connector C1 between terminal B4 and ground. Does the test lamp light? | -- | Go to Step 7 | Go to Step 8 |
5 |
Does the test lamp flash? | -- | Go to Step 9 | Go to Step 10 |
6 | Repair the open in CKT 150 between the hazard switch and ground splice pack G201. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | System OK | -- |
7 | Repair the open in CKT 739 between the left IP junction block and the hazard switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | System OK | -- |
8 | Replace the left IP junction block. Refer to Underhood Fuse Block Replacement in Wiring Systems. Is the repair complete? | -- | System OK | -- |
9 | Replace the hazard switch. Refer to Hazard Warning Switch in Instrument Panel, Gauges, and Console. Is the repair complete? | -- | System OK | -- |
10 |
Does the test lamp flash? | -- | Go to Step 11 | Go to Step 12 |
11 | Repair the open in CKT 16 between the hazard switch and the turn/headlamp switch assembly. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | System OK | -- |
12 | Replace the turn/headlamp switch assembly. Refer to Multifunction Switch in Steering Column. Is the repair complete? | -- | System OK | -- |
