Front Side Door Window Switch Replacement Right Door

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable.
2. Use a flat bladded tool in order to pry the power window switch (3) from the door. Pry at the top of the switch.
3. Disconnect the electrical connector (2) from the power window switch.
4. Remove the bezel (1) from the power window switch  (3) by prying out the retainers (4) with the flat bladed tool.

1. Install the bezel (1) to the door power window switch (3).
2. Connect the electrical connector (2) to the power window switch (3).
3. Install the power window switch (3) to the door.
4. Connect the negative battery cable.

Front Side Door Window Switch Replacement Left Door

1. Remove the power accessory switch panel. Refer to Power Accessory Switch Panel Replacement .
2. Release the power window switch retainers in order to remove the switch from the panel.

1. Install the power window switch to the power accessory switch panel. Ensure that the retainers lock into postition.
2. Install the power accessory switch panel. Refer to Power Accessory Switch Panel Replacement .