GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Malibu 🢒 Body and Accessories 🢒 Cruise Control 🢒 Cruise Control Switch Replacement

Removal Procedure
  1. Disable the SIR system. Refer to Disabling the SIR System in SIR.
  2. Remove the steering wheel from the steering column. Refer to Steering Wheel Replacement in Steering Wheel and Column-Tilt.

    3. Object Number: 743511 Size: SH
  3. Release the retaining tabs inside the steering wheel and remove the trim that covers the back of the steering wheel.
  4. Remove the bolt that attaches the ground wire to the steering wheel.

    5. Object Number: 743512 Size: SH
  5. Pry outward with a small flat-bladed tool to remove the cruise control switch from the steering wheel.
  6. In a downward motion push the switches back through the steering wheel to remove the cruise control switches and wire harness from the steering wheel.

Installation Procedure

    Object Number: 743512 Size: SH
  1. In a upward motion push the switches and wire harness back through the steering wheel.
  2. Push downward on the cruise control switch to install the cruise control switch to the steering wheel.
  3. Install the bolt that attaches the ground wire to the steering wheel. Tighten till fully seated.

    4. Object Number: 743510 Size: SH
  4. Install the trim cover to the back of the steering wheel engaging all the locking tabs.
  5. Install the steering wheel to the steering column. Refer to Steering Wheel Replacement in Steering Wheel and Column-Tilt.
  6. Enable the SIR system. Refer to Disabling the SIR System in SIR.
  7. Perform a Diagnostic System Check. Refer to Diagnostic System Check - Cruise Control in Cruise Control.