Removal Procedure
- Remove the seat cushion cover and pad from the seat cushion frame. Refer to Front Seat Cushion Cover Replacement .
- Disconnect the seat back recliner cable from the seat cushion frame.
- Remove the seat back recliner bolts from the seat cushion frame.
- Remove the seat back with recliners from the seat cushion frame.
- Remove the power seat switch bracket screws. Remove the bracket from the seat cushion frame.
- Remove the seat adjuster bolts (1) from the seat cushion frame (2).
- Remove the seat adjusters (3) from the seat cushion frame (2).
Installation Procedure
- Install the seat adjuster (3) to the seat cushion frame (2).
- Install the seat adjuster bolts (1) to the seat cushion frame (3).
- Install the power seat switch bracket to the seat cushion frame. Install the power seat switch bracket screws.
- Connect the seat back recliner cable to the seat cushion frame.
- Install the seat back with recliner to the seat cushion frame. Install the seat back recliner bolts.
- Install the front seat cushion cover and pad to the seat cushion frame. Refer to Front Seat Cushion Cover Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten bolts to 25 N·m (18 lb ft).
Tighten
Tighten the screws to 5 N·m (44 lb in).
Tighten
Tighten the bolts to 24 N·m (18 lb ft).
