Info - Proper Removal of Power Window Switch to Avoid Damage to Door Trim Pad or Power Window Switch - Remove Trim Pad First

To replace the left front door power window switch, the door panel must be removed. There is a retaining clip at the front of the switch and two retaining tabs on the side of the switch. The clip and tabs must be released from the back side of the door panel. Trying to pry the switch out of the door trim panel without releasing the tabs and clip from the back will result in damage to either the door trim panel, the switch bezel or both. may result.

When removing the door trim panel, be careful not to pull on the wire to the trunk release switch, or damage to the switch

Refer to SI document #1236404 for information on left front door window switch removal.