For 1990-2009 cars only
SMU - Revised Ball Stud to Steering Knuckle Nut Tightening Specification
| Subject: | Revised Ball Stud to Steering Knuckle Nut Tightening Specification |
| Models: | 2004 Chevrolet Malibu |
This bulletin is being issued to revise the ball stud to steering knuckle nut tightening specification in the Front Suspension sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
First pass - 50 N·m (37 lb ft)
Reverse nut 3/4 turn
Second pass - 50 N·m (37 lb ft) +40 degrees
The following documents have been updated in SI:
| • | Document ID #1245622 - Fastener Tightening Specifications |
| • | Document ID #1243022 - Lower Control Arm Replacement |
