Spark Plug Wire Harness Replacement 1.3L
Removal Procedure
Important: Note the correct routing of the wires prior to removal in order to maintain
the correct engine firing order. Incorrect routing to the distributor cap
will cause an engine misfire. Incorrect routing, or incorrect clearance
to engine parts may cause an engine misfire or damage to the wires.
- Carefully remove the secondary (spark plug) wires from the wire retainers.
Important: Do not pull on the secondary (spark plug) wire. Internal damage may
result.
- Grasp the secondary (spark plug) wire boot and twist 1 half turn in
each direction in order to release the boot.
- Remove the secondary (spark
plug) wires from
the spark plugs.
- Remove the secondary (spark
plug ) wires from
the ignition coils.
Installation Procedure
- Install the secondary (spark plug) wires to the spark plugs.
- Route the secondary (spark plug) wires as previously noted and
insert them into the secondary wire retainers.
- Install the secondary (spark plug) wires to ignition coils.
Spark Plug Wire Harness Replacement 1.0L
Removal Procedure
Important: Note the correct routing of the wires prior to removal in order to maintain
the correct engine firing order. Incorrect routing to the distributor cap
will cause an engine misfire. Incorrect routing, or incorrect clearance to
engine parts may cause an engine misfire or damage to the wires.
- Carefully remove the spark plug wires from the wire retainers.
Important: Do not pull on the spark plug wire. Internal damage may result.
- Grasp the spark plug wire boot (2) and twist 1 half turn in each direction
in order to release the boot.
- Remove the spark plug
wires from the spark plugs .
- Remove the spark plug and the coil wires from the distributor
cap.
- Remove the coil wire from the ignition coil.
Installation Procedure
- Install the coil wire
to ignition coil.
- Install the spark plug and the coil wires to the distributor cap.
- Route the spark plug wires as previously noted and carefully insert
them into the secondary wire retainers.
- Connect the spark plug wires (1) to the spark plugs.