Was the HVAC Blower Controls System Check performed?

--

Go to Step 2

Go to HVAC Blower Controls System Check

1. Turn the ignition switch to the ON position.
2. Move the blower speed selector switch to the HIGH position.
3. Backprobe the blower speed selector switch connector with a test light from terminal 3 to ground.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

Repair the open in the PNK wire between the blower speed selector switch and S232. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to HVAC Blower Controls System Check

--

Replace the blower speed selector switch. Refer to Control Assembly Replacement .

Is the repair complete?

--

Go to HVAC Blower Controls System Check

--