GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Metro 🢒 HVAC 🢒 HVAC Systems - Manual 🢒 Blower Motor Resistor Replacement

Removal Procedure
  1. Remove the powertrain control module (PCM). Refer to Powertrain Control Module Replacement 1.0L or Powertrain Control Module Replacement 1.3L in Engine Controls.
  2. Disconnect the blower motor resistor electrical connector.

    3. Object Number: 354261 Size: SH
  3. Remove 1 screw (3) and the blower motor resistor (2) from the blower case (1).

Installation Procedure

    Object Number: 354261 Size: SH
  1. Install the resistor (2) to the blower case (1). Secure the resistor with the 1 screw (3).
  2. Connect the blower motor resistor electrical connector.
  3. Install the PCM. Refer to Powertrain Control Module Replacement 1.0L or Powertrain Control Module Replacement 1.3L in Engine Controls.