Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 | Was the wiper/washer system check performed? | -- | Go to Step 2 | |
2 | Backprobe the junction block connector C3 using J 35616-200 from cavity 9 to B+. Does the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 | Replace the combination switch. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement in Restraints. Is the repair complete? | -- | -- | |
4 | Test for an open in the BLK wire between the combination switch and the junction block. Was an open found? | -- | Go to Step 6 | Go to Step 5 |
5 | Replace the junction block. Is the repair complete? | -- | -- | |
6 | Repair the open. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- |