GM Service Manual Online
For 1990-2009 cars only

Name

Location

Locator View

Connector End View

Front Washer Pump

Left front side of the engine compartment, under the washer fluid reservoir

Wiper/Washer Component Views

Wiper/Washer Connector End Views

Front Wiper Motor

Right rear side of the engine compartment, against the bulkhead

Wiper/Washer Component Views

Wiper/Washer Connector End Views

Junction Block

Behind left side of the IP

Power and Grounding Component Views

Power and Grounding Connector End Views

Rear Washer Pump (2-Door LSi)

Left front side of the engine compartment under washer fluid reservoir

Wiper/Washer Component Views

Wiper/Washer Connector End Views

Rear Wiper Motor (2-Door LSi)

Center of the liftgate

Wiper/Washer Component Views

Wiper/Washer Connector End Views

Rear Wiper/Washer Switch (2-Door LSi)

In IP, left of the steering column

--

Wiper/Washer Connector End Views

Turn Signal/Combination Switch

On steering column

--

Lighting Systems Connector End Views

C200 (12 Cavities)

Main harness to the IP harness, behind the left IP, near junction block

Harness Routing Views

Inline Harness Connector End Views

C203 (13 Cavities)

I/P harness to floor harness, behind left side of the IP, near junction block

Harness Routing Views

Inline Harness Connector End Views

C402 (6 Cavities) (2-Door)

Floor harness to liftgate harness, right rear corner of vehicle

Harness Routing Views

--

G102

Left front side of the engine compartment on the left front inner fender near battery

Harness Routing Views

--

G203

Junction block case ground, under the left side of the IP

--

--

G401 (2-Door)

Center of the liftgate, near rear wiper motor

Harness Routing Views

--

P200

Left rear engine compartment, on the bulkhead, near the brake master cylinder

Harness Routing Views

--

P403 (2-Door)

Upper right side of the liftgate

Harness Routing Views

--

S115

Main harness, approximately 35 cm (14 in) from the rear washer pump connector.

Harness Routing Views

--

S207

Main harness, approximately 12 cm (5 in) from the G201 breakout

--

--

S213

Main harness, approximately 8 cm (3.125 in) from P200

--

--

S247

Main harness, approximately 18 cm (7.06 in) from P200

--

--