Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Audible Warnings System Check? | -- | Go to Step 2 | |
2 | Disconnect the junction block connector C2. Does the alarm continue to sound? | -- | Go to Step 3 | Go to Step 4 |
3 | Test for a short to voltage using a J 39200 in the BLU/BLK wire between the junction block Connector C4 cavity 14 and the audio alarm module cavity 4. Was there a short to voltage condition found? | -- | Go to Step 5 | Go to Step 6 |
4 | Replace the ignition key warning switch. Is the repair complete? | -- | -- | |
5 | Repair the short to voltage in the BLU/BLK wire between junction block connector C4 cavity 14 and cavity 4 of the audio alarm module. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
6 | 1. Inspect the audio alarm module for bad connections. 2. If no problem is found, replace the audio alarm module. Refer to Audio Alarm Module Replacement . Is the repair complete? | -- | -- |
