Did you perform the Audible Warnings System Check?

--

Go to Step 2

Go to Audible Warnings System Check

1. Disconnect the audio alarm module connector.
2. Turn the ignition switch to ON.
3. Connect a test lamp from the audio alarm module connector cavity 7 to B+.

Does the test lamp light?

--

Go to Step 4

Go to Step 3

Use a test lamp in order to backprobe the junction block connector C4 from cavity 16 to B+.

Does the test lamp light?

--

Go to Step 6

Go to Step 5

With the audio alarm module still disconnected and the ignition switch turned to ON.

Connect a test lamp from cavity 5 of the audio alarm module to ground.

Does the test lamp light?

--

Go to Step 8

Go to Step 7

1. Inspect for a poor ground connection at the junction block.
2. If the connection is OK, replace the junction block.

Is the repair complete?

--

Go to Audible Warnings System Check

--

Repair the open in the BLK wire between the junction block and the audio alarm module. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Audible Warnings System Check

--

Repair the open BLK/WHT wire between cavity 5 of the audio alarm module connector and junction block Connector C4 cavity 3. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Audible Warnings System Check

--

Replace the audio alarm module. Refer to Audio Alarm Module Replacement in Instrument Panel, Gauges and Console.

Is the repair complete?

--

Go to Audible Warnings System Check

--