Did you perform the defogger system check?

--

Go to Step 2

Go to Defogger System Check

1. Turn the ignition switch to the ON position.
2. Press the rear defogger switch to the ON position.
3. Use a J 35616-200 in order to backprobe the instrument panel cluster assembly connector C3 from terminal 13 to ground.

Does the test lamp light?

--

Go to Step 3

Go to Step 5

Inspect for an open in BLK wire between the instrument panel cluster assembly and the junction block.

Is the assembly OK?

--

Go to Step 4

Go to Step 2

Repair/replace the instrument panel cluster printed circuit.

Is the repair complete?

--

Go to Defogger System Check

--

Repair an open in RED/WHT wire between S225 and the instrument panel cluster assembly.

Is the repair complete?

--

Go to Defogger System Check

--