Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Power Door Locks System Check performed? | -- | Go to Step 2 | |
2 | Are the power door locks inoperative with the switch in both the LOCK and UNLOCK positions? | -- | Go to Step 5 | Go to Step 3 |
3 | Are the power door locks inoperative with the switch in the LOCK the position only? | -- | Go to Step 6 | Go to Step 4 |
4 | Are the power door locks inoperative with the switch in the UNLOCK the position only? | -- | Go to Step 7 | Go to Step 1 |
5 |
Does the switch test OK? | -- | Go to Step 12 | Go to Step 8 |
6 | Test for continuity between terminals 1 and 2 of the switch with the switch in the LOCK position. Does the switch test OK? | -- | Go to Step 12 | Go to Step 9 |
7 | Test for continuity between terminals 1 and 3 of the switch with the switch in the UNLOCK position. Does the switch test OK? | -- | Go to Step 12 | Go to Step 10 |
8 | Test for an open in the BLK wire between the switch and S314. Was an open found? | -- | Go to Step 11 | Go to Step 13 |
9 | Test for an open in the PNK wire between the switch and the power door lock control module. Was an open found? | -- | Go to Step 11 | Go to Step 13 |
10 | Test for an open in the PNK/BLK wire between the switch and the power door lock control module. Was an open found? | -- | Go to Step 11 | Go to Step 13 |
11 | Repair the open in the wire. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
12 | Replace the switch. Refer to Front Side Door Lock Replacement (front) or Rear Door Lock Replacement (rear). Is the replacement complete? | -- | -- | |
13 | Replace the power door lock control module. Is the replacement complete? | -- | -- |
