Body Rear End Adjustment Specifications 2 Door
The following specifications are to be used to ensure the proper clearances and flushness of the rear end body components after body repair procedures are complete.
Location | Clearance Gap | Flushness |
|---|---|---|
Front door to Quarter Panel (3) | 5.0 mm (0.20 in) | -1.0 to 0.0 mm (-0.04 to 0.00 in) |
Liftgate Door to Quarter Window (2) | 6.3 mm (0.25 in) | -1.0 to 0.0 mm (-0.04 to 0.00 in) |
Liftgate Door to Roof (1) | 8.6 mm (0.34 in) | 0.0 to -1.0 mm (0.00 to -0.04 in) |
Liftgate Door to Roof (4) | 5.6 mm (0.22 in) | 0.0 to -1.0 mm (0.00 to -0.04 in) |
Liftgate Door to Extension Back Panel (5) | 3.8-5.8 mm (0.15-0.23 in) See Note | -- |
Liftgate Door to Rear Combination Lamp (6) | 5.2 mm (0.205 in) | 2.5 mm (0.098 in) |
Note: Difference of the left and the right side: 1.0 mm (0.04 in) maximum | ||
Body Rear End Adjustment Specifications 4 Door
The following specifications are to be used to ensure the proper clearances and flushness of the rear end body components after body repair procedures are complete.
Location | Clearance Gap | Flushness |
|---|---|---|
Rear Door to Quarter Panel (1) | 5.1 mm (0.20 in) | 0.0-1.0 mm (0.00-0.04 in) |
Trunk Lid to Quarter Panel (2) | 3.6 mm (0.14 in) | -1.8 to 0.0 mm (-0.07 to 0.00 in) |
Trunk Lid to Rear Window (5) | 5.0 mm (0.20 in) | -2.6 mm (-0.102 in) |
Trunk Lid to Rear Combination Lamp (4) | 0.3 mm (0.012 in) | -- |
Trunk Lid to Extension Back Panel (3) | 4.2 mm (0.17 in) See Note | -1.0 to 0.0 mm (-0.4 to 0.00 in) |
Note: Difference of the left and the right side: 1.0 mm (0.04 in) maximum | ||
