Removal Procedure
- Remove the ashtray (7)
from the ashtray guide by performing the following steps:
1.1. | Depress the spring loaded tab. |
1.2. | Pull the ashtray (7) rearward. |
- Remove the 4 screws that retain the IP center trim bezel (4).
- Pull the IP center trim bezel (4) forward in order to gain
access to the cigar lighter electrical connector.
- Disconnect the cigar lighter electrical connector (2).
- Remove the IP center trim bezel (4) from the vehicle.
- Remove the ashtray guide (7), if necessary. Refer to
Ashtray Replacement
.
- Remove the cigar lighter (5,6), if necessary.
Installation Procedure
- Install the cigar lighter (5,6),
if removed.
- Install the ashtray guide (7), if removed. Refer to
Ashtray Replacement
.
- Connect the cigar lighter electrical connector (2).
- Install the IP center trim bezel (4). Secure the trim bezel
with the 4 screws.
- Slide the ashtray (7) into the ashtray guide until the
spring loaded tab engages.