A misaligned column

1. Inspect the following components:

•	The column

•	Verify that the alignment is correct.

•	The mounting

•	The bearings

2. Adjust , repair, and/or replace the components as needed.

Refer to Steering Column Replacement .

A deformed or improperly installed shaft seal

1. Inspect for proper installation.
2. Reseat the seal.
3. Tighten the seal to specifications.
4. Replace the seal as needed.

Refer to Intermediate Steering Shaft Replacement or Steering Shaft, Lower Bearing, and Jacket - Assemble - Off Vehicle Steering Shaft, Lower Bearing, and Jacket - Assemble - Off Vehicle or Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle or Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle .

A flash in the ID of the shift tube

Inspect and service as needed.

Refer to Steering Column Jacket - Disassemble - Off Vehicle or Steering Column Jacket - Disassemble - Off Vehicle .

A tight intermediate shaft universal joint

Clean, inspect, and replace as needed.

Refer to Intermediate Steering Shaft Replacement .

A damaged upper or lower bearing

1. Inspect the upper and/or the lower bearing(s).
2. Replace as needed.

Refer to Steering Column Replacement or Steering Shaft, Lower Bearing, and Jacket - Assemble - Off Vehicle or Steering Shaft, Lower Bearing, and Jacket - Assemble - Off Vehicle or Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle or Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle .