Step
| Action
| Value(s)
| Yes
| No
|
1
| Use a J 39200
Digital Multimeter
(DMM) to check FUSE 41 for an open.
Is Fuse 41 open?
| --
|
Go to Step 2
|
Go to Step 3
|
2
|
• | Use a J 39200
DMM to
inspect CKT 440 from FUSE 41 terminal E2 to auxiliary
power drop connector terminal A for a short to ground. |
Is the repair complete?
| --
| Go to
Cigar Lighter/Auxiliary Outlets System Check
| System OK
|
3
| Use a J 39200
DMM in order to inspect FUSE 38 for an open.
Is FUSE 38 open?
| --
|
Go to Step 4
|
Go to Step 5
|
4
|
- Use a J 39200
DMM to
inspect CKT 43 from FUSE 38 terminal B2 to auxiliary
power drop connector terminal B for a short to ground.
- Replace FUSE 38.
Is the repair complete?
| --
| Go to
Cigar Lighter/Auxiliary Outlets System Check
| System OK
|
5
|
- Set the ignition switch to RUN.
- Use a test lamp in order to backprobe between the auxiliary power
drop connector terminal C and ground.
Does the test light illuminate?
| --
|
Go to Step 6
|
Go to Step 10
|
6
|
- Set the ignition switch to OFF.
- Use a J 39200
DMM to
inspect CKT 150 between the auxiliary power drop connector terminal C
and S213 for an open.
Is there an open in CKT 150?
| --
|
Go to Step 7
|
Go to Step 8
|
7
| Repair the open
in CKT 150.
Is the repair complete?
| --
| Go to
Cigar Lighter/Auxiliary Outlets System Check
| System OK
|
8
| Use a J 39200
DMM in order to inspect CKT 150 between S213 and G205 for an open.
Is there an open in CKT 150?
| --
|
Go to Step 9
|
Go to Step 10
|
9
| Repair the open
in CKT 150.
Is the repair complete?
| --
| Go to
Cigar Lighter/Auxiliary Outlets System Check
| System OK
|
10
| Replace the auxiliary power drop
connector. Refer to Power Accessory Port Replace - Front Floor Console for
service procedure.
Is the repair complete?
| --
| Go to
Cigar Lighter/Auxiliary Outlets System Check
| System OK
|