SMU - SEC. 3D - REVISED REAR STRUT COMPONENT & SPRING. Chevrolet Monte Carlo 1998

SUBJECT: SERVICE MANUAL UPDATE - SECTION 3D - REVISED REAR STRUT COMPONENT AND SPRING REPLACEMENT/DISASSEMBLE PROCEDURE

MODELS: 1997-98 BUICK CENTURY, REGAL 1997-98 CHEVROLET LUMINA, MONTE CARLO 1997 OLDSMOBILE CUTLASS SUPREME 1998 OLDSMOBILE INTRIGUE 1997-98 PONTIAC GRAND PRIX

THIS BULLETIN IS BEING ISSUED TO REVISE THE REAR STRUT COMPONENT AND SPRING REPLACEMENT/DISASSEMBLE PROCEDURE IN SECTION 3D OF THE SERVICE MANUAL, INCORPORATING UPDATED ESSENTIAL TOOLS.

PLEASE USE THE FOLLOWING ATTACHMENTS TO REPLACE THE EXISTING PAGES IN THE SERVICE MANUAL.

FIGURES: 00

ATTACHMENTS: 04

Object Number: 336856 Size: FS

Object Number: 336858 Size: FS

Object Number: 336860 Size: FS

Object Number: 336862 Size: FS

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.