Notice: Cap the fittings and plug the holes when servicing the fuel system in order to prevent dirt and other contaminants from entering the open pipes and passages.

Important: Always maintain cleanliness when servicing fuel system components.

1. Relieve fuel system pressure. Refer to Fuel Pressure Relief .
2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in general information.
3. Remove the fuel tank. Refer to Fuel Tank Replacement .
4. Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
5. Remove the fuel level sensor (5) from the modular fuel sender.

1. Install the fuel level sensor (5) to the modular fuel sender.
2. Reinstall the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
3. Reinstall the fuel tank. Refer to Fuel Tank Replacement .
4. Lower the vehicle.
5. Reconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in engine electrical.
6. Inspect for fuel leaks.

6.1.	Turn ignition Switch ON for 2 seconds.

6.2.	Turn ignition switch OFF for 10 seconds.

6.3.	Turn ignition switch ON.

6.4.	Check for fuel leaks.