Important: 

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .



2. Remove the cruise control cable from the cruise control module.

•	For the 3.1 engine, refer to Cruise Control Cable Replacement .

•	For the 3800 engine, refer to Cruise Control Cable Replacement .

3. Disconnect the electrical connector from the cruise control module.



4. Remove the cruise control module nuts.

1. Install the cruise control module on the mounting studs.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the cruise control module nuts.

Tighten
Tighten the cruise control module nuts to 2 N·m (18 lb in).




3. Remove the cruise control cable from the cruise control module.

•	For the 3.1 engine, refer to Cruise Control Cable Replacement .

•	For the 3800 engine, refer to Cruise Control Cable Replacement .

4. Connect the electrical connector to the cruise control module.
5. Adjust the cruise control cable.

•	For the 3.1 engine, refer to Cruise Control Cable Adjustment .

•	For the 3800 engine, refer to Cruise Control Cable Adjustment .

6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .