Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Does the new cigar lighter pop out to the edge of the cigar lighter housing and is the filament hot? | -- | ||
2 | Replace the cigar lighter. Refer to Cigar Lighter Housing Replacement - Instrument Panel for service procedure. Is the repair complete? | -- | -- | |
3 | Use a DMM in order to inspect FUSE 1 for an open. Is FUSE 1 open? | -- | ||
4 |
Is the repair complete? | -- | Systems OK | |
5 | Use a test lamp in order to backprobe between the cigar lighter connector terminal A and ground. Does the test light illuminate? | -- | ||
6 | Repair the open or short to ground in circuit 1240. Is the repair complete? | -- | Systems OK | |
7 | Use a test lamp in order to backprobe between the cigar lighter connector terminal B and ground. Does the test light illuminate? | -- | ||
8 | Repair the poor connection or open in circuit 150. Is the repair complete? | -- | Systems OK | |
9 | Replace the cigar lighter housing. Refer to Cigar Lighter Housing Replacement - Instrument Panel for service procedure. Is the repair complete? | -- | Systems OK |
