Removal Procedure
- Remove the instrument panel (IP) cluster trim plate. Refer to
Instrument Cluster Trim Panel Replacement
.
- Remove the IP ashtray
(4).
- Remove the IP ashtray bracket screws.
- Remove the IP ashtray bracket (2) from the IP.
- Disconnect the electrical connector.
Installation Procedure
- Connect the electrical
connector.
- Install the instrument panel (IP) ashtray bracket (2) to the IP.
- Install the IP ashtray bracket screws.
Tighten
Tighten the IP ashtray bracket screws to 1.9 N·m (17 lb in).
- Install the IP ashtray (4).
- Install the IP cluster trim plate. Refer to
Instrument Cluster Trim Panel Replacement
.