GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Monte Carlo 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Front Floor Console Armrest Replacement

Removal Procedure
  1. Raise the front floor console armrest.
  2. Remove the upper front floor console screw.
  3. Gently separate the sides of the front floor console.
  4. Remove the front floor console armrest.

Installation Procedure
  1. Gently separate the sides of the front floor console.

    2. Install the front floor console armrest.

  2. Connect the sides of the front floor console.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the upper front floor console screw.

    4. Tighten
    Tighten the upper front floor console screws to 2 N·m (18 lb in).

  4. Lower the front floor console armrest.