Did you perform the Lighting Systems Diagnostic System Check?

Go to Step 2

Go to A Diagnostic System Check - Lighting Systems

1. Turn the ignition switch to the OFF position.
2. Disconnect the instrument panel cluster (IPC) connector.
3. Test for an open, high resistance or short to ground in the left turn signal input circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

System OK

Go to Step 3

Inspect the turn signal bulb and the connections to the cluster. If the bulb and connections are OK, replace the instrument cluster. Refer to IP Cluster Replacement in Instrument Panel, Gauges and Console.

Did you complete the repair?

System OK

--