GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 PJJ 🢒 Body and Accessories 🢒 Wipers/Washer Systems 🢒 Wiper Arm Tip Pressure Check, Blade Element Check

Wiper Arm Tip Pressure Check

    Object Number: 306518 Size: SH
  1. Run the wiper arms to the mid-wipe position.
  2. Remove the wiper blades from the wiper arms. Refer to Wiper Arm Blade Replacement.
  3. Attach a scale to the end of the wiper arm and measure the force required to lift the wiper arm perpendicular to the windshield to normal working height (height with the blade attached).
  4. Replace the wiper arm if the measurement is not within the specification. Refer to Wiper Arm Replacement.

    5. Tip Pressure
    Driver side -- 8.1-9.5 Newtons (26-31 oz)

  5. Passenger side -- 5.8-7.0 Newtons (19-25 oz)
  6. Install the wiper blades on the wiper arms. Refer to Wiper Arm Blade Replacement.

Blade Element Check

    Object Number: 334256 Size: SH
  1. Remove the wiper blades from the wiper arms. Refer to Wiper Arm Blade Replacement.
  2. Look down the length of the blade element.
  3. Replace the wiper blade if the rubber element which contacts the glass is not on the centerline of the blade +/-15 degrees.
  4. Install the wiper blades on the wiper arms. Refer to Wiper Arm Blade Replacement.