Removal Procedure
- Disable the SIR system.
Refer to Disabling the SIR System in SIR.
- Remove the trim plate from the instrument panel cluster (1).
Refer to Trim Replacement - IP Lower Center in Instrument Panel, Gauges, and
Console.
- Disconnect the electrical connectors.
- Press tabs to remove the fog lamp switch (3).
Installation Procedure
- Install the fog lamp switch (3).
- Connect the electrical connectors.
- Install the trim panel to the instrument panel cluster
(1). Refer to Trim Replacement - IP Lower Center in Instrument Panel, Gauges,
and Console.
- Enable the SIR system. Refer to Trim Plate Bezel Replacement -
IP Cluster in SIR.